Acer Aspire 7535G

Acer Aspire 7535G / MS2262

Installation Debian Lenny 5 + noyau backports

Configuration

• AMD Athlon 64 X2 processor QL-64 (2.1GHz)
• Écran 17.3
• 4GB Memory
• 250GB HDD
• ATI Mobility Radeon HD 4570 512MB (up to 1471MB HyperMemory)
  • OK en 2D
  • Pas d'accélération 3D en pilote libre
• Webcam intégrée (OK)
• Lecteur multi-cartes (OK)
• WiFi: Atheros AR5B91 (OK avec noyau 2.6.30)
• Carte son (OK avec noyau 2.6.30)

00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
00:01.0 PCI bridge: Acer Incorporated [ALI] Device 9602
00:02.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0)
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1)
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode]
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3a)
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices [AMD] Mobile K10 [Turion X2, Athlon X2, Sempron] HyperTransport Configuration (rev 40)
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 11h [Turion X2, Athlon X2, Sempron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Mobile K10 [Turion X2, Athlon X2, Sempron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Mobile K10 [Turion X2, Athlon X2, Sempron] Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Mobile K10 [Turion X2, Athlon X2, Sempron] Link Control
01:05.0 VGA compatible controller: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics]
02:00.0 VGA compatible controller: ATI Technologies Inc M92 [Mobility Radeon HD 4500 Series]
02:00.1 Audio device: ATI Technologies Inc R700 Audio Device [Radeon HD 4000 Series]
03:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe (rev 10)
06:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)

Activer le son

Utiliser le noyau Debian Backports 2.6.30.

Activer le wifi

Utiliser le noyau Debian Backports 2.6.30.

Problèmes non résolus

• La retour de la mise en veille ne se fait pas bien: écran noir, instabilités noyau (connexion SSH ératique et erreurs dans dmesg)
• Le retour de l'hibernation est perfectible: écran en résolution de couleurs réduite
• Accélération 3D pas disponible en 100% libre